Heat pump cooling MasterTherm.ie

What you get

Heating

Cooling

Low Noise

Cooling (Air Conditioning) With MasterTherm Heat Pumps

Cooling with significantly lower costs compared to conventional air conditioners

All MasterTherm heat pumps can have a cooling mode for your building. Thanks to advanced construction and regulation, our heat pumps cool at a significantly lower operating cost as compared to conventional air conditioning. We distinguish between passive or reversible interior cooling.

Passive Cooling: Free Cooling

Super efficient use of renewable energy

AquaMaster heat pumps can be factory-equipped with a passive cooling function, where the ground cooling energy is transferred directly to the building. Energy consumption for cooling is reduced and drives the circulation pumps. You ‘cool’ for free while also storing that energy in the ground collector for later use (collector regeneration).

Energy-Saving Reversible Heat Pump Cooling

Condensing and non-condensing cooling

Compressor cooling is enabled by all Master Therm heat pumps by reversing their operation. According to the temperature of the cooling water, we distinguish between condensing and non-condensing cooling.

Condensing Cooling

Condensing cooling works with a low temperature of cooling water (so-called sharp water) and in combination with wall or under-ceiling convectors, provides a rapid onset of cooling by a stream of cooled air, similar to conventional air conditioning.

Condensation-Free Cooling

Condensation-free cooling has a higher cooling water temperature and is more energy efficient (it does not waste energy on condensation). Cooling energy is usually supplied to the floor/wall heating system and it gradually cools the supporting structure of the building.

It is advantageous to equip the heat pump with a desuperheater; a device for efficient hot water heating. Such a heat pump is able to heat hot water simultaneously in the reverse cooling mode.